Cookie Consent by


M2 750 Watt 5-Channel Element Ready™ Amplifier

Designed to withstand the elements, the R2-750X5 amplifier is an Element Ready™ 750 watt, full-range class-D model, capable of operating at 4Ω or 2Ω stereo, and 4Ω bridged/mono with a subwoofer channel that can be run at 4Ω or 2Ω





This amplifier is extremely efficient because of its class D technology which reduces demand on the electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass.


  • Element Ready: built to stand up to the marine environment
  • C.L.E.A.N.: for easy setup and optimized output
  • P.O.W.E.R. supply: generates more power as voltage increases

CE Compliant

This product fulfills all essential safety and environmental requirements as defined in the European Directives (768/2008 EC).

C.L.E.A.N. Set-Up

Patented circuit with in/out clip LEDs to help match a source to amp and optimize output.

Balanced Differential Inputs

Differential inputs eliminate noise picked up by signal cables.


MEHSA3 reduces MOSFET temperatures, lowers distortion, increases durability and prolongs the output device life span.

CEA-2006 Compliant

Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifier's output power ratings are REAL POWER numbers, not inflated marketing ratings.

Element Ready™ - Amps

These amplifiers are protected against Dust, UV, Corrosion, and feature Stainless hardware.


Power supply circuit design that allows the amplifier to increase output power as voltage increases.

Class D

High efficiency amplifier design that reduces current consumption from the charging system.


NOMAD is a "real time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances.

Rollback Protection

During demanding musical conditions, the amplifier can dynamically reduce demand to prevent stress on the output devices.

CEA-2006 Compliant

Number of Channels

Total Power

(Sum of Rated Power)

Rated Power

(RMS Continuous Power)

Dynamic Power



Frequency Response

Input Sensitivity

Circuit Topology Class

Efficiency (average)

Total Harmonic Distortion (THD+Noise)

Signal Input

Signal Output

Crossover Controls

CEA-2006 Power Rating

50W x 4 + 200W x 1 @ 4Ω

≤1.0% THD+N

Remote Controls

Visual Indicators


750 Watts

4 x 50 x + 1 x 200 Watts @ 4Ω

4 x 100 + 1 x 350 Watts x @ 2Ω

2 x 200 Watts @ 4Ω Bridged/Mono

Power Wire Gauge

Power Input Connector

4 x 70 Watts + 1 x 241 Watts @ 4Ω

4 x 114 Watts + 1 x 426 Watts @ 2Ω

2 x 234 Watts @ 4Ω Bridged/Mono

Speaker Wire Gauge

Speaker Output Connector



20 Hz - 20 kHz

Operating Voltage

150 mV - 12 V

Recommended Fuse

(not included)

Class D

Dimensions (H x W x D)


Shipping Weight

4-Ohm: <1.0%

2-Ohm: <1.0%

Front Low-Level: 2 RCA

Front High-Level: 4-Pin Molex

Rear Low-Level: 2 RCA

Rear High-Level: 4-Pin Molex

Sub Low-Level: 2 RCA

Sub High-Level: 4-Pin Molex


Front High-Pass:

50 Hz - 250 Hz @ 12dB/Octave Butterworth

Front Low-Pass:

50 Hz - 250 Hz @ 12dB/Octave Butterworth

Rear High-Pass:

50 Hz - 250 Hz @ 12dB/Octave Butterworth

Rear Low-Pass:

50 Hz - 250 Hz @ 12dB/Octave Butterworth

Sub Low-Pass:

50 Hz - 250 Hz @ 12dB/Octave Butterworth

Sub Infrasonic:

15 Hz - 40 Hz @ 12dB/Octave Butterworth



C.L.E.A.N. In

C.L.E.A.N. Out (front)

C.L.E.A.N. Out (rear)

C.L.E.A.N. Out (sub)


Compression Terminal Block


Compression Terminal Block


9 - 16 VDC

120 A

4,9 x 17,3 x 28,5 cm

2,78 kg

Knowledge Base Articles


Owner's manual: